Hull 002

By Dermot Tynan, over 6 years ago.

I have discussed the hull construction process in earlier posts, which you can find via the above search bar. To recap, you take the hull design and "loft" the shape of each section or bulkhead, from the drawing. You then cut this out of 6mm marine ply (or equivalent), mount each of the stations onto a strongback, and now you have something which forms the shape.

I also need to add a keelson to the picture. A keelson is a long, keel-like piece of wood which runs from stem to stern, connecting the bulkheads. I cut one already but it turned out to be too short due to a miscalculation on my part. Generally I cut a thin (about 2cm wide) outline of the keel of the boat, from a sheet of ply.

  • September 24, 2016
  • |
  • |

Impending Launch.

By Dermot Tynan, over 6 years ago.

Hull #002 is coming along, slowly. The stations are mounted on the strongback and I've been double-checking the alignment. I have time to do this because 1/32nd inch balsa wood is hard to come by, and because I haven't cut the keelson yet. Well, I have, but I need to re-cut it. The original was cut to the wrong profile.

While the work on hull 2 continues, I've been using Hull #001 to test out aspects of the boat design and control systems. In fact, I am very close to launching the hull…

  • November 1, 2016
  • |
  • |

Rudder Movement Test

By Dermot Tynan, almost 6 years ago.

I have uploaded a video (to YouTube) of the rudder mechanism on Hull #1 working from end-stop to end-stop. (Excuse the video quality, I used my phone to record it.)

I connected an Arduino (Mega2560 if you want to know) and a SparkFun stepper controller to the stepper motor which drives the rudder. I wanted to exercise the tiller gears and the rudder shaft for a while. The video shows the rudder swinging from almost completely to Starboard, all the way back to Port.

  • April 27, 2017
  • |
  • |

Can an autonomous sailboat cross the Atlantic?

By Dermot Tynan, about 5 years ago.

"Sailing a boat across the Atlantic is challenging enough for a human sailor. But what about a computer? BBC Future visits a sailing regatta for robots."

I'm including a link here for an interesting article published by the BBC on autonomous sailboats.

  • November 20, 2017
  • |
  • |

Hello to the Little Red Daemon

By Dermot Tynan, almost 10 years ago.

After much tweaking and hacking with configuration files and kernel build options, I finally have a FreeBSD 8.3-RELEASE kernel and install running on a Wrap board. Technically, it's NanoBSD, which is a scaled-down FreeBSD install, which boots from Compact Flash. The WRAP board is the PC Engines forerunner to the ALIX. When National Semiconductor and AMD stopped making Geode chips, the guys at PC Engines had to stop making their very popular WRAP board. I still have a few of them tucked away, for emergencies such as this.

  • March 30, 2013
  • |
  • |